Borealis AG PP    

PP Microcomposites:

-Borcom BG055AI is a polypropylene microcomposite intended for injection and back injection moulding. 22g/10min (230 °C /2,16 kg)    920 kg/m3           

-Borcom WE007AE is a polypropylene microcomposite intended for injection moulding. The product is available in natural colour. 12g/10min (230 °C /2,16 kg)    925 kg/m3          

-Borcom WG140AI is a polypropylene microcomposite intended for injection moulding. 20g/10min (230 °C /2,16 kg)    980 kg/m3           

PP Random/heterophasic copolymers：

-Bormed RB845MO is a random copolymer for blow moulding, with good transparency and contact clarity, very good gloss and surface finishBottles up to 2 litres can be steam sterilised due to heat distortion temperature (HDT) This grade also features high heat distortion temperature. Products from this grade can also be produced byIBM. 1,9g/10min (230 °C /2,16 kg)    902 kg/m3           

Bormed SA833CF is a very soft random heterophasic copolymer. 0,8g/10min (230 °C /2,16 kg)              

-Bormed SC820CF is a very soft random heterophasic copolymer. 3,9g/10min (230 °C /2,16 kg)              

-Borpact SG910MO is a high impact and transparent polypropylene. This grade provides high gloss, high transparency and excellent impact properties. 25g/10min (230 °C /2,16 kg)              

Borpact SG930MO is a random heterophasic copolymer intended for injection moulding. This grade yields high transparency and deep freeze impact resistance combined with excellent flow properties. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. 25g/10min (230 °C /2,16 kg)    900 kg/m3           

Borsoft SA233CF is a very soft random heterophasic copolymer. 0,8g/10min (230 °C /2,16 kg)              

Borsoft SD233CF is a very soft random heterophasic copolymer. 7g/10min (230 °C /2,16 kg)              

PP TERPOLYMER

-Bormed TD109CF is a propylene alpha olefin copolymer. 6,0g/10min (230 °C /2,16 kg)              

Borseal TD210BF is a C2/C4 terpolymer 6g/10min (230 °C /2,16 kg)              

Borseal TD215BF is a C2/C4 terpolymer 6g/10min (230 °C /2,16 kg)             

Borseal TD220BF is a C2/C4 terpolymer 6g/10min (230 °C /2,16 kg)      

PP Block/heterophasic copolymer:

BA110CF is a heterophasic copolymer. 0,85g/10min (230 °C /2,16 kg)              

BA202E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. 0,3g/10min (230 °C /2,16 kg)    900 kg/m3         
BA204E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. 0,8g/10min (230 °C /2,16 kg)    900 kg/m3           

BB125MO is a heterophasic copolymer. This grade is a low melt flow rate grade intended for blow moulding and sheet extrusion, and features extremely good processability with improved melt strength and melt stability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. 1,3g/10min (230 °C /2,16 kg)    906 kg/m3           

BB213CF is a heterophasic copolymer. 1,2g/10min (230 °C /2,16 kg)              

BB412E is a natural, medium molecular weight, medium melt flow rate polypropylene block copolymer with an optimal mechanical properties balance resulting in high stiffness and very good impact strength both at room temperature and at low temperatures. 1,3g/10min (230 °C /2,16 kg)    900 kg/m3          

BC142MO is a controlled rheology polypropylene heterophasic copolymer. It is characterized by high impact strength, good stiffness, excellent processability, good flow properties and low warpage. 5g/10min (230 °C /2,16 kg)    905 kg/m3           

BC240TF is a heterophasic copolymer. 3,5g/10min (230 °C /2,16 kg)          

BC245MO is a very stiff high impact polypropylene heterophasic copolymer intended for injection moulding. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. 3,5g/10min (230 °C /2,16 kg)    905 kg/m3           

BC250MO is a very high impact polypropylene heterophasiccopolymer intended for injection moulding. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. 4g/10min (230 °C /2,16 kg)    904 kg/m3           

BC545MO is a low-blush polypropylene heterophasic copolymer intended for injection moulding. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is characterized by combination of high stiffness, very high impact strength and low stress whitening. 3,5g/10min (230 °C /2,16 kg)    908 kg/m3           

BC612WG is a polypropylene copolymer intended for injection moulding. The product is available in natural but other colours can be provided on request. 5g/10min (230 °C /2,16 kg)    900 kg/m3           

BC650MO is a very high impact polypropylene heterophasiccopolymer intended for injection moulding. This product offers a good UV resistance, further enhanced by pigmentation. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. 4g/10min (230 °C /2,16 kg)    904 kg/m3           

BD212CF is a heterophasic copolymer. 5g/10min (230 °C /2,16 kg)              

BD310MO is a heterophasic copolymer. This grade is characterized by an optimum combination of good impact strength and very high stiffness. 8g/10min (230 °C /2,16 kg)    905 kg/m3           

BD712CF is a heterophasic copolymer. 7g/10min (230 °C /2,16 kg)              

BD950MO is a heterophasic copolymer. This grade is intended for compression and injection moulding. The main features of this grade are good stiffness and impact resistance, very good processability, high melt strength and extremely low tendency to stress whitening. 7g/10min (230 °C /2,16 kg)              

BE170MO is a heterophasic copolymer. This grade is characterized by high impact strength, high stiffness and good flow properties. 13g/10min (230 °C /2,16 kg)    902 kg/m3           

BE375MO is a heterophasic copolymer. This grade is characterized by optimum combination of high impact strength and stiffness. 13g/10min (230 °C /2,16 kg)    905 kg/m3           

BE677AI is a polypropylene copolymer intended for injection moulding. 14g/10min (230 °C /2,16 kg)    905 kg/m3           

BEC5012 is a high molecular weight, low flow rate polypropylene block copolymer with very high impact strength. 0,30g/10min (230 °C /2,16 kg)    900 kg/m3           

BF330MO is a heterophasic copolymer. This polymer is characterized by an optimum combination of high stiffness, high impact strength and good flow properties. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. 18g/10min (230 °C /2,16 kg)    905 kg/m3           

BF335SA is a polypropylene copolymer intended for injection moulding. 20g/10min (230 °C /2,16 kg)    900 kg/m3           

BG373MO is a heterophasic copolymer. 30g/10min (230 °C /2,16 kg)    910 kg/m3           

BH345MO is a heterophasic copolymer. This grade is characterized by optimum combination of very high stiffness, good flow properties and good impact strength. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. 45g/10min (230 °C /2,16 kg)    904 kg/m3           

BH980MO is a heterophasic copolymer. This grade provides very high stiffness, high gloss and low stress whitening. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. 45g/10min (230 °C /2,16 kg)    910 kg/m3           

BHC5012C is a polypropylene copolymer intended for injection moulding, extrusion and blow moulding. 0,3g/10min (230 °C /2,16 kg)    905 kg/m3           

BJ356MO is a heterophasic copolymer. This grade provides very high melt flow rate, very high stiffness and medium impact strength. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. 100g/10min (230 °C /2,16 kg)    906 kg/m3           

BJ360MO is a heterophasic copolymer. This grade provides unique combination of very high melt flow rate, high impact strength and stiffness. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. 60g/10min (230 °C /2,16 kg)    906 kg/m3          

BJ380MO is a very high melt flow heterophasic copolymer with high/medium impact strength and stiffness. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. 80g/10min (230 °C /2,16 kg)    906 kg/m3           

BorECO BA2000 is a high molecular weight, low melt flow rate polypropylene block copolymer with a good balance of mechanical properties. 0,3g/10min (230 °C /2,16 kg)    900 kg/m3           

BorECO BA212E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high stiffness and impact strength. 0,3g/10min (230 °C /2,16 kg)    900 kg/m3           

BorECO BA222E is a high molecular weight, low flow rate polypropylene block copolymer with superior stiffness and excellent impact properties. 0,25g/10min (230 °C /2,16 kg)    915 kg/m3          

BorECO BA415E is a high molecular weight, low melt flow rate polypropylene block copolymer with high stiffness and impact strength. 0,5g/10min (230 °C /2,16 kg)    900 kg/m3          

BorECO BEC5015 is a high molecular weight, low flow rate polypropylene block copolymer with high stiffness and impact strength. 0,3g/10min (230 °C /2,16 kg)    900 kg/m3           

Borcoat BA213E is a polypropylene compound used as a component in thermal insulation coating systems. 0,25g/10min (230 °C /2,16 kg)    900 kg/m3           

Borcoat BB108E-1199 is a polypropylene compound 0,9g/10min (230 °C /2,16 kg)    920 kg/m3 (Compound)          

Borcoat MA115E is a highly filled polypropylene compound and isself coloured. 2,8g/10min (230 °C /2,16 kg)    2000 kg/m3          

Bormed BE860MO is a heterophasic copolymer. This grade is characterized by excellent impact strength even at low temperatures combined with high stiffness and good flow properties. 13g/10min (230 °C /2,16 kg)    902 kg/m3           

Bormod BF970MO is a heterophasic copolymer. This product is characterized by an optimum combination of very high stiffness and high impact strength. 20g/10min (230 °C /2,16 kg) 905 kg/m3           

Bormod BH348MO is a polypropylene copolymer characterized by high impact strength, fast flow and crystallisation speed. 50g/10min (230 °C /2,16 kg)    903 kg/m3           

Borpact BC914TF is a heterophasic copolymer. 3,0g/10min (230 °C /2,16 kg)              

Borpact BC918CF is a heterophasic copolymer. 3,0g/10min (230 °C /2,16 kg)              

   PP glass fibre reinforced compounds:

BJ100HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process. The product is available in natural colour. 90g/10min (230 °C /2,16 kg)    904 kg/m3           

GB205U is a 20 % chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. The product is available in natural but other colours can be provided on request. 2,0g/10min (230 °C /2,16 kg)    1040 kg/m3                      
GB311U is a 30 % chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. 2,0g/10min (230 °C /2,16 kg)    1120 kg/m3                   
GB364WG is a 30 % chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. The product is available in natural but other colours can be provided on request. 2g/10min (230 °C /2,16 kg)    1120 kg/m3           

GB366WG is a 30 % chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. The product is available in natural but other colours can be provided on request. 2g/10min (230 °C /2,16 kg)    1120 kg/m3           

GD310U is a 30 % chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. 7g/10min (230 °C /2,16 kg)    1130 kg/m3         

Nepol GB215HP is a 20 % long glass fibre reinforced polypropylene grade intended for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, areproviding outstanding mechanical properties such as high strength, highstiffness and excellent impact behaviour.    1040 kg/m3         

Nepol GB303HP is a 30 % long glass fibre reinforced polypropylene grade intended for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, areproviding outstanding mechanical properties such as high strength, highstiffness and excellent impact behaviour. 2g/10min (230 °C /2,16 kg)    1120 kg/m3          
Nepol GB402HP is a 40 % long glass fibre reinforced polypropylene grade intended for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, areproviding outstanding mechanical properties such as high strength, highstiffness and excellent impact behaviour. 2g/10min (230 °C /2,16 kg)    1240 kg/m3         

Nepol GB601HP is a special long glass fibre reinforced polypropylene concentrate grade intended for injection moulding and extrusion. This material is designed for the dilution process in combination with special developed dilution polypropylene grades.                   
Xmod GB306SAF is a 35 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. The product is available in standard black 9502. 2g/10min (230 °C /2,16 kg)    1180 kg/m3  
Xmod GD301FE is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding.            

Xmod GD301HP is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. 4g/10min (230 °C /2,16 kg)    1170 kg/m3         

Xmod GD301FE-9502 -             

Xmod GD301HP-8081 -             

Xmod GD302HP is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. 3,3g/10min (230 °C /2,16 kg)    1160 kg/m3           

Xmod K65G2 is a 20 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. 6g/10min (230 °C /2,16 kg)    1040 kg/m3           
Xmod K65G3 is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. 6g/10min (230 °C /2,16 kg)    1120 kg/m3        

PP Random copolymers：

Beta-PPR RA7050 is a high weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is steelgrey coloured similar toRAL 7042. 0,30g/10min (230 °C /2,16 kg)  905 kg/m3           

Beta-PPR RA7050-GN is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured similiar to RAL 6024. 0,3g/10min (230 °C /2,16 kg)    905 kg/m3           

BorPure RB501BF is a random copolymer 1,9g/10min (230 °C /2,16 kg)              

Borclear RB707CF is a random copolymer 1,5g/10min (230 °C /2,16 kg)              

Borclear RB709CF is a random copolymer 1,5g/10min (230 °C /2,16 kg)              

Borclear RC707MO - This product is intended for blow moulding. This grade provides high gloss, high transparency and excellent impact properties. This grade also features high heat distortion temperature.              

Borclear RE736CF is a random copolymer 11g/10min (230 °C /2,16 kg)              

Borclear RE936CF is a random copolymer 12g/10min (230 °C /2,16 kg)              

Borclear RF366MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. The improved processability, even at low melt temperature, allows energy savings and faster cycle time. 20g/10min (230 °C /2,16 kg)    905 kg/m3          

Bormed RB801CF is a random copolymer 1,9g/10min (230 °C /2,16 kg)              

Bormed RB845MO is a random copolymer for blow moulding, with good transparency and contact clarity, very good gloss and surface finishBottles up to 2 litres can be steam sterilised due to heat distortion temperature (HDT) This grade also features high heat distortion temperature. Products from this grade can also be produced byIBM. 1,9g/10min (230 °C /2,16 kg)    902 kg/m3           

Bormed RD804CF is a random copolymer with low ethylene content. 8g/10min (230 °C /2,16 kg)              

Bormed RD808CF is a random copolymer with high ethylene content.              

Bormed RF825MO is a specially modified transparent polypropylene random copolymer with high meltflow. This polymer grade is intended for production ofmedical and medical-related articles. It is characterized by easy processability, hightransparency, high gloss and good stiffness-impact balance. In addition it can be sterilized with ethylene oxide or steam and has an excellent chemical resistance. 20g/10min (230 °C /2,16 kg)    905 kg/m3           

Bormed RF830MO is a specially modified transparent polypropylene random copolymer with high meltflow. This polymer grade is intended for production ofmedical and medical-related articles. It is characterized by easy processability, hightransparency, high gloss and good stiffness-impact balance. In addition it can be sterilized with gamma radiation and has an excellent chemical resistance. 20g/10min (230 °C /2,16 kg)    905 kg/m3           

Bormed RG835MO is a specially modified transparent polypropylene random copolymer with high meltflow. This polymer grade is intended for production ofmedical and medical-related articles. This grade is modified with internal lubricant for products requiring a low surface friction. and is characterized by easy processability, high transparency, high gloss, controlled low friction, and good stiffness-impact balance at ambient temperature. In addition it can be sterilized with ethylene oxide or steam and has an excellent chemical resistance. 30g/10min (230 °C /2,16 kg)    905 kg/m3           

Borseal RE239CF is a random copolymer 11g/10min (230 °C /2,16 kg)              

RA130E is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is natural coloured. 0,25g/10min (230 °C /2,16 kg)    905 kg/m3         

RA130E-1005  0,25g/10min (230 °C /2,16 kg)    905 kg/m3         

RA130E-1498 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is white coloured. 0,25g/10min (230 °C /2,16 kg)    905 kg/m3           

RA130E-2491 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is blue coloured. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

RA130E-2492 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is dark blue coloured. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

RA130E-6015 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

RA130E-6017 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

RA130E-6020 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

RA130E-6034 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3          

RA130E-8427 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured. 0,25g/10min (230 °C /2,16 kg)    905 kg/m3         

RB206MO is a random copolymer with good transparency andcontact clarity, very good gloss and surface finish The high stiffness of this grade allows for a reduction in cycle time. This grade also features high heat distortion temperature. 1,9g/10min (230 °C /2,16 kg)    902 kg/m3           

RB307MO is a random copolymer with good transparency andcontact clarity, very good gloss and surface finish This grade also features high heat distortion temperature. 1,5g/10min (230 °C /2,16 kg)    902 kg/m3           

RD204CF is a random copolymer 8g/10min (230 °C /2,16 kg)              

RD234CF is a random copolymer 8g/10min (230 °C /2,16 kg)              

RD360MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. 8g/10min (230 °C /2,16 kg)    905 kg/m3           

RD461CF is a random copolymer 8g/10min (230 °C /2,16 kg)              

RD734CF is a random copolymer 8g/10min (230 °C /2,16 kg)              

RD735CF is a random copolymer              

RE420MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is intended for injection moulding and stretch blow moulding. It is designed for high-speed injection mouldingand contains nucleating and demoulding additives. 13g/10min (230 °C /2,16 kg)    905 kg/m3           

RF365MO is a specially modified transparent polypropylene random copolymer with high meltflow. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. 20g/10min (230 °C /2,16 kg)    905 kg/m3           

RF926MO is a specially modified transparent polypropylene random copolymer with high meltflow. This grade is intended for injection stretch blow moulding (ISBM). It is designed for high-speed injection mouldingand contains nucleating and demoulding additives. 20g/10min (230 °C /2,16 kg)    905 kg/m3           

RG435MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. 30g/10min (230 °C /2,16 kg)    905 kg/m3           

RG460MO is a specially modified transparent polypropylene random copolymer with high meltflow. It is designed for high-speed injection mouldingand contains nucleating and demoulding additives. 30g/10min (230 °C /2,16 kg)    906 kg/m3           

RJ370MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate. It is designed for high-speed injection mouldingand contains nucleating and demoulding additives. 45g/10min (230 °C /2,16 kg)    905 kg/m3           

RJ470MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate. It is designed for high-speed injection mouldingand contains nucleating and demoulding additives. 70g/10min (230 °C /2,16 kg)    905 kg/m3           

PP HOMOPOLYMER：

BE50-7032 is a high molecular weight, low melt flow rate polypropylene homopolymer characterised by high stiffness, high heat distortion temperature and high resistance to thermal ageing. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

BE52 is a polypropylene homopolymer intended for blowmoulding. The product is available in natural but other colours can be provided on request. 0,25g/10min (230 °C /2,16 kg)    900 kg/m3         

Beta (?)-PP BE60-7032 is a high molecular weight, low melt flow rate polypropylene homopolymer with fine grained ?-modification crystalline structure leading to excellent impact strength even at low temperatures, increased hydrostatic strength and improved chemical resistance. 0,30g/10min (230 °C /2,16 kg)    905 kg/m3           

Borclean HB311BF is a polypropylene homopolymer              

Borclean HC300BF is a high cristallinity homopolymer film resin. 3,3g/10min (230 °C /2,16 kg)              

Borclean HC312BF is a polypropylene homopolymer 3,2g/10min (230 °C /2,16 kg)              

Borclean HC318BF is a polypropylene homopolymer 3,2g/10min (230 °C /2,16 kg)              

Borflow HL504FB is a polypropylene homopolymer intended for fibre applications              

Borflow HL508FB is a polypropylene homopolymer intended for fibre applications 800g/10min (230 °C /2,16 kg)              

Borflow HL512FB is a polypropylene homopolymer intended for fibre applications 1.200g/10min (230 °C /2,16 kg)              

Bormed HD800CF is a polypropylene homopolymer 8g/10min (230 °C /2,16 kg)              

Bormed HD810MO is a polypropylene homopolymer This polymer grade is intended for production ofmedical and medical-related articles. In addition it can be sterilized with gamma radiation and has an excellent chemical resistance. 10g/10min (230 °C /2,16 kg)    907 kg/m3           

Bormed HD850MO is a medium melt-flow-rate polypropylene homopolymer prepared by Borealis Nucleation Technology (BNT). This grade has exceptional dimensional stabilityand its high crystallization temperature allows for the reduction of cycle time. This polymer grade is intended for production ofmedical and medical-related articles. 8g/10min (230 °C /2,16 kg)    910 kg/m3           

Bormed HF840MO is a polypropylene homopolymer intended for injection moulding. This grade is modified with internal lubricant for products requiring a low surface friction. and is characterized by easy processability, high transparency, controlled low friction, good physical properties, good printability and easy demoulding. In addition it can be sterilized with ethylene oxide or steam and has an excellent chemical resistance. 19g/10min (230 °C /2,16 kg)    905 kg/m3           

Bormod HC904CF  2,8g/10min (230 °C /2,16 kg)    905 kg/m3         

Bormod HD905CF is a polypropylene homopolymer 6,5g/10min (230 °C /2,16 kg)              

Bormod HD915CF is a polypropylene homopolymer              

Bormod HF955MO is a very stiff polypropylene homopolymer. This grade combines unique Borstar reactor design with Borstar nucleation technology to produce highly-crystalline polypropylene. This combination also results in unique balance of properties especially suited for high-speed injection moulding. 20g/10min (230 °C /2,16 kg)    908 kg/m3           

Borpeel WD255CF is a polyolefin resin suitable for the manufacturing of unoriented peelable cast films on chill roll processes. 6g/10min (230 °C /2,16 kg)              

Daploy WB130HMS is a structurally isomeric modified propylene homopolymer.              

Daploy WB135HMS is a structurally isomeric modified propylene homopolymer.              

Daploy WB140HMS is a structurally isomeric modified propylene homopolymer.              

Daploy WF420HMS is a structurally isomeric modified propylene homopolymer. 22g/10min (230 °C /2,16 kg)              

HA104E is a natural high molecular weight, high melt flow rate polypropylene homopolymer characterised by well-balanced stiffness to impact strength ratio at increased processing properties. 0,75g/10min (230 °C /2,16 kg)    905 kg/m3          

HB205TF is a low melt flow rate polypropylene homopolymer intended for extrusion, calendering and thermoforming. 1g/10min (230 °C /2,16 kg)              

HB306MO is a low melt-flow-rate polypropylene homopolymer intended for compression moulding of caps and closures. This grade is designed for the caps and closuresmarket and therefore contains a lubricant for an optimum opening torqueof the cap. This grade combines a good balance of stiffness and impact strength with good processability and melt stability. Additives provide anti-static protection. 2g/10min (230 °C /2,16 kg)    910 kg/m3           

HB600TF  2g/10min (230 °C /2,16 kg)              

HB601WG is a polypropylene homopolymer intended for injection moulding and blow moulding. The product is available in natural but other colours can be provided on request. 2,2g/10min (230 °C /2,16 kg)    900 kg/m3           

HC101BF is a polypropylene homopolymer 3,2g/10min (230 °C /2,16 kg)              

HC110BF is a polypropylene homopolymer intended for injection moulding and extrusion.              

HC205TF is a special nucleated polypropylene homopolymerintended for thermoforming packaging. 4g/10min              

HC207TF is a special nucleated polypropylene homopolymerintended for thermoforming packaging. 2,8g/10min (230 °C /2,16 kg)              

HC401BF is a polypropylene homopolymer 3,2g/10min (230 °C /2,16 kg)              

HC600TF is a polypropylene homopolymer intended for thermoformed packaging applications.              

HD120MO is a polypropylene homopolymer with a good combination of mechanical properties intended for injection moulding. 8g/10min (230 °C /2,16 kg)    908 kg/m3           

HD204CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. 8g/10min (230 °C /2,16 kg)    900 - 910 kg/m3 (Base Resin)           

HD214CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. 8g/10min (230 °C /2,16 kg)    900 - 910 kg/m3           

HD234CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. 8g/10min (230 °C /2,16 kg)              

HD244CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. 8g/10min (230 °C /2,16 kg)              

HD601CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. 8g/10min (230 °C /2,16 kg)              

HD621CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. 8g/10min (230 °C /2,16 kg)              

HE125MO is a polypropylene homopolymer intended for injection moulding. This grade is characterized by good flow properties and high stiffness in and is specially suitable for high-speed injection moulding of articles demanding easy flow. 12g/10min (230 °C /2,16 kg)    908 kg/m3           

HE365FB is a polypropylene homopolymer intended for fibre applications 12g/10min (230 °C /2,16 kg)            

HE465FB is a polypropylene homopolymer intended for fibre applications 11g/10min (230 °C /2,16 kg)              

HF136MO is a polypropylene homopolymer intended for injection moulding. This grade is characterized by a good combination of mechanical and flow properties. 20g/10min (230 °C /2,16 kg)    908 kg/m3           

HF420FB is a polypropylene homopolymer intended for fibre applications 19g/10min (230 °C /2,16 kg)              

HF700SA is a polypropylene homopolymer intended for injection moulding. 21g/10min (230 °C /2,16 kg)    905 kg/m3           

HG265FB is a polypropylene homopolymer intended for fibre applications 26g/10min (230 °C /2,16 kg)              

HG313MO is a polypropylene homopolymer intended for injection moulding. Its high melt flow makes it especially suitable for products with long flow length. This grad is designed for high-speed injection moulding and contains nucleating, antistatic and slip additives. 30g/10min (230 °C /2,16 kg)    910 kg/m3           

HG385MO is a polypropylene homopolymer intended for injection moulding. This grade combines unique Borstar reactor design with Borstar nucleation technology to produce highly-crystalline polypropylene. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction. 25g/10min (230 °C /2,16 kg)    910 kg/m3           

HG420FB is a polypropylene homopolymer intended for fibre applications 25g/10min (230 °C /2,16 kg)              

HG430MO is a polypropylene homopolymer intended for injection moulding. This polymer product is characterized by a superior impact resistance. This grade has ductile failure in falling weightimpact test at room temperature. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction. 25g/10min (230 °C /2,16 kg)    910 kg/m3           

HG455FB is a polypropylene homopolymer intended for fibre applications 27g/10min (230 °C /2,16 kg)              

HH315MO is a polypropylene homopolymer intended for injection moulding. Its high melt flow makes it especially suitable for products with long flow length. This grad is designed for high-speed injection moulding and contains nucleating, antistatic and slip additives. 35g/10min (230 °C /2,16 kg)    910 kg/m3           

HJ325MO is a polypropylene homopolymer intended for injection moulding. Its very high melt flow makes it especially suitable for thin-wall packaging and products with long flow length. is designed for high-speed injection moulding and contains nucleating and antistatic additives. The additives are optimized to provide reduced tendency for mould plate-out. 50g/10min (230 °C /2,16 kg)    910 kg/m3           

HK060AE is a special low viscosity polypropylene homopolymer compound developed to fit the production of Glass Matt reinforced Thermoplastics. This material is also suitable as base resin forthe production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrateson the injection moulding process. 125g/10min (230 °C /2,16 kg)    905 kg/m3           

WG320C is a polypropylene for extrusion coating.              

WG341C is a polypropylene for extrusion coating. 25g/10min (230 °C /2,16 kg)              

WG350C is a polypropylene for extrusion coating. 18g/10min (230 °C /2,16 kg)    1040 kg/m3          

PP Mineral filled compounds：

Daplen EG103AI is a 15 % mineral filled polypropylene compound intended for injection moulding. 26g/10min (230 °C /2,16 kg)    1020 kg/m3         

Daplen KSR65T20 is a 20 % mineral filled polypropylene compound intended for injection moulding.             

FS65T20 is a 20 % mineral filled polypropylene compound intended for injection moulding. 6g/10min (230 °C /2,16 kg)    1040 kg/m3           

FSC65T30 is a 30 % mineral filled polypropylene compound intended for injection moulding. 5g/10min (230 °C /2,16 kg)    1150 kg/m3 

MB250WG is a 20 % mineral filled polypropylene compound intended for injection moulding. 2,5g/10min (230 °C /2,16 kg)            

MB250WG-7020 is a 20 % mineral filled polypropylene compound intended for injection moulding. 2,5g/10min (230 °C /2,16 kg)             

MB350WG is a 30 % mineral filled polypropylene compound intended for injection moulding. 2,5g/10min (230 °C /2,16 kg)    1130 kg/m3                   

MC55T1 is a 10 % mineral filled high crystallinity polypropylene compound intended for injection moulding. 13g/10min (230 °C /2,16 kg)    970 kg/m3          

MD206U is a 20 % mineral filled polypropylene compound intended for injection moulding. 7g/10min (230 °C /2,16 kg)    1040 kg/m3

MD231U is a 20 % mineral filled polypropylene compound intended for injection moulding. 6g/10min (230 °C /2,16 kg)    1050 kg/m3

MD441U is a 40 % mineral filled polypropylene compound intended for injection moulding. 6g/10min (230 °C /2,16 kg)    1220 kg/m3

ME212U is a 20 % mineral filled polypropylene compound intended for injection moulding. 13g/10min (230 °C /2,16 kg)    1050 kg/m3           

ME266U is a 20 % mineral filled polypropylene compound intended for injection moulding. 12g/10min (230 °C /2,16 kg)    1050 kg/m3           

ME268AI is a 20 % mineral filled polypropylene compound intended for injection moulding. 12g/10min (230 °C /2,16 kg)

MG302AI is a 30 % mineral filled polypropylene compound intended for injection and back injection moulding. 24g/10min (230 °C /2,16 kg)    1140 kg/m3         

MS64T20 is a 20 % mineral filled polypropylene compound intended for injection moulding. 22,5g/10min (230 °C /2,16 kg)    1070 kg/m3         

MS65T40 is a 40 % mineral filled polypropylene compound intended for injection moulding.    1240 kg/m3         

PS65C40 is a 40 % mineral filled polypropylene compound intended for injection moulding. 16g/10min (230 °C /2,16 kg)    1270 kg/m3         

PS65T20 is a 20 % mineral filled polypropylene compound intended for injection and back injection moulding. 23g/10min (230 °C /2,16 kg)    1040 kg/m3

Steripeel WD170CF is a polyolefin resin suitable for the manufacturing of unoriented sterilisable peelable cast films on chill roll processes. 6,5g/10min (230 °C /2,16 kg)              
Steripeel WE150CF is a polyolefin resin suitable for the manufacturing of unoriented sterilisable peelable cast films on chill roll processes.    

RTPO：

KSR4525 is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour. 7g/10min (230 °C /2,16 kg)    905 kg/m3